Gypsum sprayer is a device specially used for wall spraying during construction. It mixes gypsum materials and sprays them directly on the wall, significantly improving construction efficiency and quality. Gypsum spraying machines generally consist of a feeding system, a mixing system, a spraying system, and a control system. Its working principle is to mix gypsum material and water, send the mixed gypsum liquid into the spray gun through a high-pressure pump, and then spray the gypsum onto the wall surface through spraying. Gypsum spray plaster machines are widely used in architectural decoration, interior decoration, exterior wall coatings, and other fields. They can quickly and evenly spray gypsum onto walls, reducing the construction cycle and improving work efficiency. At the same time, the gypsum spraying machine also has the advantages of simple operation and low construction cost and is widely welcomed and applied.
Working Principle of Gypsum Spray Plaster
The gypsum sprayer is a device specially used for spraying gypsum slurry. It is driven by a motor to transmit the gypsum slurry from the container to the spray gun through a pipe. There is an air compressor inside the spray gun, which sprays the gypsum slurry from the nozzle through the air pressure. During the spraying process, the operator controls the operation and spraying direction of the sprayer through the handle. The spraying machine can adjust spraying speed, pressure, and spraying area according to different processes and requirements. The sprayer can achieve uniform and efficient gypsum spraying, improving construction efficiency and quality.
Things Need Attention When Using A gypsum sprayer
- Make sure that the gypsum spray plaster is checked before use to confirm that all parts are firmly installed, the power cord is not damaged, and the spray gun is not blocked.
- When operating, wear protective equipment, including gloves, masks, goggles, etc. to prevent gypsum particles from causing damage to the skin or respiratory tract.
- Before adding gypsum powder and water, it’s necessary to clean the tank of the gypsum sprayer to avoid mixing with other impurities.
- After spraying, the gypsum spraying machine should be cleaned to avoid clogging or damage caused by residual gypsum powder.
