The rebar derusting machine is mainly equipment that uses machinery instead of manual grinding to remove rust. Mechanical rust removal is much better than manual methods in terms of efficiency and environmental protection. The rust removal machine is the most commonly used mechanical rust removal method at present, because of its high efficiency, stable work, simple operation, no scratches on the rusted steel bar, and environmental protection equipment, which does not pollute the environment.
Parameter of Rebar Derusting Machine:
|Power||2.2kw*2 (without traction wheel)||3kw*2(with traction wheel)|
|Working Range||48/51mm(without traction wheel)||32-51mm(with traction wheel)|
Working Principle of Rebar Derusting Machine
The rebar rust removal machine mainly uses the high-speed shot stream thrown by the high-efficiency and powerful shot blasting device to blast the surface and inner cavity of the rotating workpiece in the chamber to remove other sticky sand, rust layer, welding slag, oxide scale, and other debris, Make it get a fine smooth surface. Improve the adhesion of the paint film and the surface of the steel, improve the fatigue strength and corrosion resistance of the steel, improve the internal quality of the steel, and extend its service life.
Main Features of Rebar Derusting Machine:
- The pipe diameter range of the steel bar derusting machine is large. Can trust all kinds of steel pipes;
- Good rust removal effect. The outer surface of the steel pipe can show metallic luster after rust removal;
- The rebar rust removal machine has no environmental pollution. When the rust remover is in operation, there is little noise and no environmental pollution;
- The principle of operation is simple. The wire wheel brush is used as a tool, which is simple and convenient to replace and low in cost, and only needs to be replaced.
- The rebar derusting machine can be flexibly used online with the wireline and spray line.
Application range of Rebar Derusting Machine:
- It can carry out high-quality rust and rust removal operations on the surface of copper, iron, aluminum, stainless steel, and other square materials;
- Foundry industry: The rebar rust removing machine can use different models according to different workpieces, and will not damage the original shape and performance of the casting.
- Mold industry: The mold itself requires smoothness. The rust remover can be polished according to different requirements without damaging the original shape and performance of the mold.
- Steel mills: The steel and steel plates produced by steel mills have many burrs when they are just out of the furnace, which will affect the quality and appearance of the steel. The use of rust remover equipment can deal with these problems and solve them easily;
- Shipyard: The steel plates used in shipyards have rust, which will affect the quality of shipbuilding. Manual de-embroidering is impossible, and the workload will be huge. The rust remover equipment can remove rust to ensure the quality of shipbuilding.
Advantages of Rebar Derusting Machine:
- Adopting full-angle and same direction three-speed dual-drive technology, the raw material contact surface is more complete, the force is more uniform, the rust removal is more thorough, and the rust and slag removal rate reaches 99.5%.
- The work efficiency is more than 3 times higher than similar products.
- The side teeth are made of manganese steel and have a long service life. The central gear adopts a split structure. Only the side teeth need to be replaced when worn, and the replacement cost is low.
- The adjusting frame has large torque, and the internal operation can be moved freely, which is convenient and labor-saving.
- The steel pipe rust removing machine adopts two-way transmission and three-speed feeding, the diameter can be adjusted, and it is suitable for the use of steel bars of different diameters.
- The steel wire wheel is made of special steel with high elasticity coefficient, and it forms a positive pressure effect with the oxide layer on the surface of the steel, which greatly guarantees the unnecessary loss of raw materials.
- Each system is driven by gears and belts, making the machine easier to operate, more stable, low noise, safe, efficient, and environmentally friendly.
Rebar Rust Remover Machine Manufacturer
The steel bar rust remover is a strip steel rust remover, which can be called a steel bar rust remover, steel bar rust remover, rust remover, steel pipe rust remover is mainly used to polish the surface of old steel. In addition to rust removal machine, we also have an electric tube bender, steel bar cutting machine, pipe shrinking machine, rebar bending machine, rebar upsetting machine, and etc.
There are many products sold by YG Machinery, such as pile breaker machine, fog cannon dust suppression, cement sprayer machine, mobile concrete pump, automatic sandblasting machine, shot blasting machine, pile breaker, water well drilling rigs, core drilling rig, industrial oxygen generator, packaging machine, etc. Free inquiry is welcome.