Steel bar bending machine, as its name implies, is the equipment to bend steel bars at an angle. The rebar bending machine can apply to different diameters of the rebars, which are usually main reinforcements with 20mm to 40mm. Its bending angle is controlled manually or by entering the angle on the computer panel, commonly 60°, 90°, and 135°. The steel bar bender mainly applies in cement prefabricated component factories, cement product factories, construction sites, highways, railways, bridge construction, steel market, etc. Now there are three hot models of rebar bending machines for sale, YG-RB40, YG-RB42, and YG-RB50. Some technical data are as follows. If they cannot meet your needs, please contact us and we will help you find a suitable one.
The steel bar bending machine is composed of a solid disc, a solid bar, a slider bar, a transfer switch, buttons to rotate forward and backward, a CNC panel, a foot pedal, casters, matching accessories, and so on. It bends the shape through the rotation of the disc by a center column in the disc and the center column on the bar. There are two buttons, one for clockwise rotation and the other for counterclockwise rotation. The steel bar bender can process steel bars of 6-50 mm, but often processed more than 20mm diameter of threaded rebar and round steel., and the angles of 60, and 90 degrees. A center pin shaft and a bending pin shaft are installed on the working disc of the steel bar bending machine.
Steel bar bending machine, one of the steel bar processing machines, whose working mechanism is a horizontal working disk rotating on a vertical axis. There is a supporting pin shaft on the solid bar with several holes, a center pin shaft, and a bending pin on the working disc. Rotating the disc, the steel bar will be bent under the matching of these three pin shafts. In order to bend steel bars of various diameters, several holes are on the working table for inserting the bending pins, and the center pins of different diameters can also be replaced accordingly.
Advantages & Features of the Rebar Bending Machine
The gear-type steel bending machine mainly consists of the motor, transmission system, working mechanism, and control system. The steel bar bending machine is equipped with moving wheels for easy movement. The motor is decelerated by a belt pulley, driving the working disc to rotate. There are generally 9 shaft holes on the working disk, the central hole is used to insert the central shaft and the surrounding 8-hole seats, and both mental bars with 6 holes on each side for inserting the stopper shafts. Based on the bending shape of the steel bar, the steel bar is placed between the central axis of the work plate and the corresponding forming shaft, and the inner side of the iron stop shaft. When the working disc rotates, one end to the bend of the steel bar rotates following the turntable and bend.
Check out the appearance of the machine. Place the steel bar bending machine on a flat place and prepare various mandrel tools.
Install the mandrel, forming shafts, stop shaft variable stop frame according to the diameter of the processed steel bar and requirements of the bending machine.
Check the mandrel, the stop block, and the turntable should have no damage and cracks. Fasten the protective cover, and begin to work after confirming the empty machine running normally.
Insert the end of the steel bar that needs to be bent into the gap between pin shafts, fix the other end close to the fuselage, and press it tightly.
When the turntable changes direction, carry out other procedures after a complete stop.
After completing the operation, clean up the site, maintain the machine, and lock the box when the power is off.
Concentrate on the operation, and be familiar with the direction of the work turntable. Place the steel bar in accordance with the rotation direction of the block frame and the work plate, not in reverse.
Do not process steel bars that exceed the diameter, numbers, and running speed specified by the machine.
Do not stand on one side of the fuselage without a fixed side within the working radius of the bent steel bar. The hooks must not face upwards, stacking the bent semi-finished products neatly.
When the machine runs, do not replace the mandrel, change the angle, adjust the speed, refuel, or move it.
